[rkhunter]

What are APTI and EPTI?

http://msdn.microsoft.com/en-us/library ... s.85).aspx
APTI - ata analog of SPTI for ATA-support devices
Actually APTI and SPTI packets will later be repack to SRB on disk or disk port driver level. The only difference, as i remember, in different cdb command.

[Tigzy]

Thanks :)

[frank_boldewin]

We started developing direct hw access library few years ago and it's still far from stable variant. Yes, it's universal, but at the same time it's really hardware dependent solution even for "simple" IDE.. ( we have hundreds(!!) of cases for different chipsets ).

and even if you will have a working hw access library this is only useful if you don't make it public or implement it in your product, otherwise it will be defeated as well.

[Dmitry Varshavsky]

We started developing direct hw access library few years ago and it's still far from stable variant. Yes, it's universal, but at the same time it's really hardware dependent solution even for "simple" IDE.. ( we have hundreds(!!) of cases for different chipsets ).

and even if you will have a working hw access library this is only useful if you don't make it public or implement it in your product, otherwise it will be defeated as well.

Everything can be defeated. The only difference is in efforts. And this library is already available in our product.

[Tigzy]

Does someone got a doc , or can explain me how to fill the CDB 16-byte block?
in the wdk, there are no explanation about this, only this short sample:

Code: Select all

// Init CDB
sptdwb.sptd.Cdb[0] = SCSIOP_READ_DATA_BUFF;
sptdwb.sptd.Cdb[1] = 2;                         // Data mode
sptdwb.sptd.Cdb[7] = (UCHAR)(sectorSize >> 8);  // Parameter List length
sptdwb.sptd.Cdb[8] = 0;	

[Dmitry Varshavsky]

Does someone got a doc , or can explain me how to fill the CDB 16-byte block?
in the wdk, there are no explanation about this, only this short sample:

Code: Select all

// Init CDB
sptdwb.sptd.Cdb[0] = SCSIOP_READ_DATA_BUFF;
sptdwb.sptd.Cdb[1] = 2;                         // Data mode
sptdwb.sptd.Cdb[7] = (UCHAR)(sectorSize >> 8);  // Parameter List length
sptdwb.sptd.Cdb[8] = 0;	

Did you check this ? \src\storage\tools\spti\spti.c
and this ? http://msdn.microsoft.com/en-us/library ... s.85).aspx

Should be pretty much clear to start..

Here is more detailed info http://www.seagate.com/staticfiles/supp ... 93068c.pdf

[Tigzy]

Did you check this ? \src\storage\tools\spti\spti.c

Yes, this sample is extracted from this.
The msdn link does not give additional information

Cdb
Specifies the SCSI command descriptor block to be sent to the target device.

[Dmitry Varshavsky]

Did you check this ? \src\storage\tools\spti\spti.c

Yes, this sample is extracted from this.
The msdn link does not give additional information

Cdb
Specifies the SCSI command descriptor block to be sent to the target device.

Then check the SCSI general specs or vendor info, example given above.

[Tigzy]

found this (french version contains much infos than english one) http://fr.wikipedia.org/wiki/Commande_SCSI

[rkhunter]

found this (french version contains much infos than english one) http://fr.wikipedia.org/wiki/Commande_SCSI

Best way, look WDK header files for command definitions.