Hello,KernelMode.info
The following English translation from Google:
Thanks fyyre the bootloader v2, I use a method which was destroyed patchGruad, but did not crack the drive load signature (DSE), the success of my own research after cracks, will now talk about the method, it may be obsolete, since when I entertainment from the music, and just to exchange two strings SeInitializeCodeIntegrity under, and then create a boot when using bcdedit -set% ENTRY_GUID% testsigning 1, here is our patch trigger point, not really test mode, thanks again fyyre, God V (who is this? ha ha)
China:
感谢fyyre的bootloader_v2,我使用里面的方法废掉了patchGruad,但并没有破解驱动加载签名(DSE),我自己研究后成功破解,现在将方法说一说,可能已经过时了,就当我自娱自乐了,只需要将SeInitializeCodeIntegrity下的两个字符串交换,然后在创建引导的时候使用bcdedit -set %ENTRY_GUID% testsigning 1 ,这里只是触发我们的patch点,并不是真的测试模式,再次感谢fyyre,God V(这是谁?哈哈)
The following English translation from Google:
Thanks fyyre the bootloader v2, I use a method which was destroyed patchGruad, but did not crack the drive load signature (DSE), the success of my own research after cracks, will now talk about the method, it may be obsolete, since when I entertainment from the music, and just to exchange two strings SeInitializeCodeIntegrity under, and then create a boot when using bcdedit -set% ENTRY_GUID% testsigning 1, here is our patch trigger point, not really test mode, thanks again fyyre, God V (who is this? ha ha)
China:
感谢fyyre的bootloader_v2,我使用里面的方法废掉了patchGruad,但并没有破解驱动加载签名(DSE),我自己研究后成功破解,现在将方法说一说,可能已经过时了,就当我自娱自乐了,只需要将SeInitializeCodeIntegrity下的两个字符串交换,然后在创建引导的时候使用bcdedit -set %ENTRY_GUID% testsigning 1 ,这里只是触发我们的patch点,并不是真的测试模式,再次感谢fyyre,God V(这是谁?哈哈)